Language:中文 | ENGLISH

Hot Line: 86-596-6571488  Email: hcyyjx@163.com

Keyword: Product Category:

Item no.: 11316295816

Item name: HCM-120T hydraulic hot press machine/finger joint board/woodworking m

Detail description
Detailed Product Description

Hydraulic hot press6layers
1.professional manufactuer
2.high efficiency and stability
3.reliable performance
4.ISO9001:2008  

 

The hydraulic hot press machine consists of principal machine ,side press machine ,cylinder assembly,hydraulic station ,steam piping entering and exiting system and electrical cabenit and so on .

Principal machine: is a framed tructure,made up of upper tray ,medium tray ,lower tray ,has high strength and good rigidity .Hot plate is between the upper and medium tray ,the serpentine inside the hot plate drilling heats the hot plate evenly by the steam .the feet and stepped plates on both side of hot plates can support the hot plate and guid the plate .

Lateral pressure device:It is fixed on both side of framework,tightening the framework.

Lateral compressor :It control advancing and retreating function.

Master cylinder :assembly fixed on the lower tray connected by circular flanges and bolts,to ensure tightness of the cylinder.

1.This machine is widely used and can make several kinds of man-made boards,such as veneer sheets,chipboards ,plywood and insulating boards ,with different pressure.

2.With advantages of small pressure loss,large flow,low failure rate,and convenient maintenance,the domestic advanced cartridge value structure has been employed in hydraulic system .

3.The machine works in boths manual and automatic manners .

4.The hydraulic hot press machine is good in frame ,safe in operation,etc

 

MAJOR TECHNICAL PARAMETERS

ITEM NO DESCRIPTION UNIT SPECIFICATION
1 MAIN CYLINDER PRESSURE KN 1200
2 SIDE CYLINDER PRESSURE KN 120
3 WORKBENCH WIDE (MM) 1300*600
4 LAYER   6
5 OPENING (MM) 80
6 MAIN CYLINDER PISTON DIAMETER (MM) 220
7 MAIN CYLINDER NO PIECE 1
8 SIDE CYLINDER TYPE/QUANTITY   30-100MM*12
9 CLOSING TIME OF MAIN CYLINDER S NO MORE THAN 30S
10 SIDE PRESSURE TIME   NO MORE THAN 3S/LAYER
11 HEATING MEDIUM   SATURATED STEAM
12 LOW PRESSURE PUMP FLOW   53L/MIN
13 HIGH PRESSURE PUMP FLOW   12L/MIN
14 SIDE PRESSURE PUMP FLOW   12L/MIN
15 MAIN CYLINDER OIL PRESSURE MPa 31.5
16 SIDE CYLINDER OIL PRESSURE MPa 14
17 TOTAL MOTOR POWER KW 7.5
18 STRUCTURE   FRAME
19 CLOSED ACTION S NO MORE THAN5S
在线咨询